山东如特安防主营:济南气体报警器,天然气报警器,二氧化硫报警器,一氧化碳报警器,氯气报警器,氢气报警器,氨气报警器等有毒/可燃气体报警器 | 联系我们 | 进入老版
全国统一服务热线
18668913066

相关资讯


如特安防手机版网站二维码

液化气报警器

  • 咨询热线:186 6891 3066
  • 产品详情

  • 联系我们


液化气报警器


☆产品名称:液化气报警器


☆产品别称:液化气浓度探测报警器


☆供电电源:DC36V±15%


☆防护等级:IP65




产品简介

----------------------------------------------------------------------

    液化气报警器(Liquefied Gas Alarm),又称液化气浓度检测报警器,或液化气泄漏探测报警器,主要针对液化气(即丙烷)气体进行浓度检测、浓度显示及浓度超标后的声光报警提醒,并可外接设备,如电磁阀、排风扇等 。
液化气浓度检测报警器(Liquefied Gas Alarm)
    液化气报警器由气体探测器(Gas Detector)(如上图)部分和气体报警控制器(Gas Controller)部分组成,气体探测器为防爆型产品,通过核心部件气体传感器实时对液化气进行浓度检测,并将检测的到数据通过线缆传送到气体报警控制器,气体报警控制器进行浓度显示、声光报警。
液化气泄漏报警器
 
    我公司销售的液化气气体报警器资质证书齐全,使用场所广泛,室内外均可。
    液化气报警器产品特点:
    ◆ 测量准确:传感器采用进口气体敏感元件,精度高,零点漂移小,抗中毒性能好。
    ◆ 防爆设计:可用于工厂条件的1、2区危险场合。
    ◆ 维修方便:传感器采用数字化模组设计,现场更换时无需校零、标定。
    ◆ 声光报警:气体探测器可选配专用的防爆声光报警器,实现现场声光报警。
    ◆ 浓度显示:气体探测器可选配液晶浓度显示,现场实时显示浓度。

液化气报警器技术参数

 检测气体  液化气 (LPG)  检测原理  催化燃烧式
 检测范围  0-100%LEL  供电电源  DC36V±15%
 功    率  <1W  通讯方式  M-BUS 两总线
 信号输出  一组无源常开信号  连接线缆  RVS 2×2.5mm2
 准 确 度  ±5%FS  响应时间  催化燃烧式 T90<30s
 材     料  铸铝  防爆螺纹   G3/4″内螺纹
 防爆标志  Exd IIC T6 Gb  IP等级  IP65
 工作温度  -40℃~70℃  湿度范围  10%RH~95%RH
 压力范围  86Kpa~106Kpa  存储温度  -25℃~55℃
 外形尺寸  190×130×75mm  重     量  1.5kg
 安装方式  贴壁式、抱管式、穿管式 

       更多产品型号和需求,请与客服沟通!

液化气探测器和报警控制器消防证书
液化气探测器和报警控制器消防证书

液化气探测器和报警控制器生产资质检验报告等证书
液化气探测器和报警控制器生产资质检验报告等证书

Liquefied Gas Alarm

Liquefied gas alarm mainly detects natural gas (i.e. propane), detects and displays mainly the concentration of liquefied gas, sending audible and visual alarm when the concentration exceeding the scheduled standard. It can linking together with outside devices, such as gas solenoid valve, electric fan.
Liquefied gas alarm consists of gas detector unit and alarm controller. Gas detector with gas sensor as the core part, is explosion-proof, detects the concentration of liquefied gas in real time and sends the data to gas alarm controller via cables. The controller displays the concentration, sends audible and visual alarm if the concentration exceeding the scheduled standard.
Liquefied gas alarm with Complete certificate, suitable for various surroundings, indoor and outdoor. 

Product feature

1. Accurate measurement: sensor with imported gas  sensory unit, high precision, less zero shift, strong anti-poisoning.
2. Explosion-proof design: suitable for 1-area and 2-area dangerous site in firm.
3. Maintenance-free: sensor designed with digital module group, no need to zero setting and calibration.
4. Audible and visual alarm: gas detector if equipped with explosion-proof audible and visual alarm, sending audible & visual alarm on the spot.
5. Concentration display: gas detector if equipped with LCD, displaying the concentration on the spot.

Technical params

1.Gas detection: Liquefied gas(propane)
2.Detection principle: Catalytic combustion type
3. Detection range: 0-100%LEL
4.Power Supply Voltage: DC36V±15%
5.capacity factor: <1W
6. Communication: Two M-BUS
7.Signal output: A group signal of passive constant opening
8.Connection wires: RVS 2×2.5mm2
9. Accuracy: ±5%FS
10.Response time: T90<30s (Catalytic combustion)
11. Materials: Cast aluminum
12. Explosion-proof connection screw thread: G3/4″ internal thread
13. Outline dimension: 190×130×75mm
14. Weight: 1.5kg
15.IP degree: IP65
16. Working temperature: -40℃~70℃
17.Humidity range: 10%RH~95%RH
18.Pressure range:  86Kpa~106Kpa
19. Storage temperature: -25℃~55℃
20. Installment: Wall mounted, embracing tube type, passing tube type

本文关键字:液化气检测报警器,液化气浓度探测报警器,Liquefied Gas Alarm,detecotr,controller